Glossy Metallic Rosewood Red Vinyl Wrap

Rosewood Red is an exotic automotive color that is known for its depth and richness. At Vinyl Frog, we have developed a premium Glossy Metallic Rosewood Red Vinyl Wrap that is designed to bring out a deep, refined rosewood tone. Our rosewood vinyl wrap is crafted to create a smooth, high-gloss surface where subtle metallic particles are visible under light, giving your vehicle a bold yet sophisticated finish.

Our rosewood red vinyl wrap is part of our Glossy Metallic range, and it is built with a durable multi-layer structure. We have engineered this red vinyl wrap so it is resistant to scratches, stains, and daily wear. It is also designed to handle UV exposure, so the rosewood finish remains stable and does not fade, crack, or peel over time. Our focus is on long-term performance as well as visual appeal.

When it comes to value, our rosewood vinyl wrap is a cost-effective option. We offer a full 59ft roll for under $600, which is enough for a complete wrap. If you are choosing professional installation, the total cost is typically between $2000 and $2500 for a sedan, depending on the design and labor. For smaller projects, we also recommend a partial wrap, where the material cost is usually under $200 while still achieving the signature rosewood look.

Features And Specifications

• High-performance, durable and environment-friendly.
  
• Premium quality polymeric calendered vinyl with long-lasting adhesion.
  
• Water and weatherproof.
  
• Scratch-resistant and anti-corrosion. 
  
• Heat and UV resistant.
  
• Easy to apply and maintain.
  
• Acrylic-based, robust adhesive.
  
• Easy to slide and reposition. 
  
• Equipped with air-release channels for bubble-free application.
  
• Sizes available: 5ft x 3.28ft. 10ft, 16ft, 33ft, 49ft, and 59ft.
  
• Color: Rosewood Red.
  
• Finish: Glossy Metallic.
  
• Packaging: Roll.
  

Things You Should Know:

How to wrap a car?

Car wrap materials

Best car wrap

The cost to wrap a car

How Much Vinyl Needs To Wrap Your Vehicle

Structure

Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of High Quality 130um Plastic Liner.

Material

• High Grade Polymeric Calendared Vinyl Film
• Fashionable, Stunning Color

• With Air Release Channel
• Bubble-free Application

• Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %

Functions

Recommended Uses

▲ Standard Size & Appearance

Classification		Unit	Spec	Remark
Thickness	Top protected film	um	36±2%	PET
	Surface materials	um	120±2%	High-grade PVC-Polymeric
	Glue	um	30±2%	High-quality Solvent-based
	Plastic liner	um	130±2%(plastic)	－
Surface		－	Opaque	－
Width		mm	1520±0. 01%	5ft
Length		mm	1800+1%	59ft

 

Physical properties 

▲ General Properties

Features		Test Method	Results
Release force N/25mm		Temperature 25℃ and Humidity 50%	0.35
Initial tack g/25mm		under 26℃ and 64%, GB31125-2014	1360
Peel Strength N/25mm		25℃and 42%, GB/T2792-1998	7.05
Holding power(h)		25℃ and 50%, GB/T4851-1998	120
Shelf life		stored in +15°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place	2 years
Application temperature		/	+20℃ to +30℃
Service Temperature		/	-50℃ to +110℃
Time Limits		Must use it within 3 months after receiving the wrap film.	3 months
Durability		Vertical exposure	2 years
Aging Test 1		7 days under 65°C	No adhesive residue with heat
Aging Test 2		10 days under 65°C	No adhesive residue without heat
Shrinkage		/	less than 4%

 

Recommended application tools:  Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater.
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!

We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.